There are two types of CPU coolers: an air CPU cooler and a liquid CPU cooler. It consists of a heat sink or a combination of heat sinks and fans. While in the liquid CPU cooler, a liquid circulates through small pipes in a heat sink and the CPU draws heat from the cooler into the system case or shell. It is released out of the system in the form of ambient air. The cooled liquid then returns to the CPU through the system and continues the process.

ARCTIC Freezer 34 eSports DUO – It cools my i5-8400 to below 30 ° C in idle and I have never seen temperatures under full load that exceed 50 degrees below. The only complaint would be that the Heatsync itself is very greasy for some reason. Another minor annoyance is that you need to remove the fan (or both fans if you have the 2-fan version) to access the mounting screws. Every time you install or uninstall, you must first remove the fans


Corsair H100i RGB PLATINUM AIO Liquid CPU Cooler, – The quality material they use is first class. And RGB lighting is out of the chain hahaha. It cools my 8700K well. I have all six cores at 4.7 GHz idle at 30 ° C. And the stress test does not exceed 63 degrees Celsius. One of the best coolers you can buy for money is the best cooler Corsair has ever made. I would recommend this fridge!

CORSAIR HYDRO SERIES H60 AIO Liquid CPU Cooler – This cooler is very nice and I can only recommend it. I use it in a push-pull configuration to draw air from outside the case. It works very well, as I said before. I can only recommend this cooler as long as I have, of course. A good case with good airflow The Sentey Burton I’ve had for years works perfectly for this setup with a total of 7 fans. I am using it in an FX-8300 version and now I let the images speak for themselves. If you keep your serial fan like me and want to do this setting (push pull), always put the weakest fan in the pull-out position. Leave the strongest fan in the push position

Cooler Master MasterLiquid ML240R Phantom – This cooler is supplied with a 3-pin distribution cable. Connect the 3-way end to the 2 fans and the pump. Connect the other end of this cable to the aRGB header on your motherboard. I did NOT have to use the included driver for Aura Sync. I made Aura Sync work with the new Asus ROG Strix Z390-E gaming motherboard in this way. I also set the “Number of Addressable LEDs on this device” setting in Aura Sync to 12.



Corsair Hydro Series H100i PRO RGB AIO Liquid CPU Cooler – Dynamic Multicolor RGB Lighting – Vibrant RGB LED pump head creates vivid lighting effects that match your physique. 75 CFM air flow. Noise level 37.0 decibels
Powered by Magnetic Levitation: Two ML Series 120mm Magnetic Levitation Technology Low Noise PWM Fans deliver incredible airflow and static pressure at low noise levels
Powerful Software – With CORSAIR iCue software you can adjust RGB lighting, individual fan speeds, and pump speed while controlling CPU and coolant temperatures.
Zero-speed mode: With zero-speed cooling profiles, the fans can come to a complete stop at low temperatures, completely eliminating fan noise. Radiator dimensions 276mm x 120mm x 27mm. Fan dimensions 120mm x 25mm
Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011 3, 2066 and AMD AM2, AM3, AM4, FM1, FM2


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published.